• Rookie
Verificador de testador de bateria, A300 Digital Car Battery Tester LCD Battery Test Analyzer Monitor Teste automático Ferramentas de diagnóstico

Verificador de testador de bateria, A300 Digital Car Battery Tester LCD Battery Test Analyzer Monitor Teste automático Ferramentas

Rating 
€ 0.33

Montante
In stock

【Prática】 Faixa de teste CCA completa (100-1700), oferece operação confiável e precisa para baterias de tamanho mais 【Instruções】 Teste contínuo com energia da bateria, nenhum dano à bateria e a polaridade reversa e a proteção de tensão fazem com que seja ultra seguro. 【Função principal】 Teste e analise o sistema de carga da bateria, indicando que a condição da bateria inclui porcentagem de duração da bateria, CCA, tensão da bateria, resistência à bateria. 【Compatível】 Ótimo compatível com a maioria das bateria de 12 volts (inclua bateria de inundação, bateria da AGM, bateria de gel, bateria de ciclo profundo), trabalhe rápido e precisamente. 【Tela de LED grande】 Venha com tela LED grande e pinça pesada, e a função do BEEP Lembre o torna mais confiável. Especificação : Item Tipo : Bateria Testador Material : ABS Tamanho do host : aprox.1in Peso : aproximadamente 261g / 9.2oz de tensão de entrada : DC12 V Itens de teste : tensão, resistência, CCA, condição da bateria Objeto aplicável : 12 V Faixa de operação de bateria : CCA : 100-1700 DIN : 100-1000 IEC : 100-1000 pt : 100-1700 porcentagem de duração da bateria : 80% - 100% boa condição 60% - 80% OK, não é ruim 40% - 60% precisa de atenção 0% - 40% A troca necessária como usar 1.

Mais dados

Item Type:
Battery Tester
Material:
ABS
Host Size:
Approx. 13x6.2x2.8cm / 5.1x2.4x1.1in
Weight:
Approx.261g/9.2oz
Input Voltage:
DC12V
Test Items:
Voltage, resistance, CCA, battery condition
Applicable Object:
12V battery
Wide Operating Range :
CCA:
100-1700
DIN:
100-1000
IEC:
100-1000
En:
100-1700
Battery Life Percentage:
80% - 100% Good Condition :
60% - 80% OK, Not Bad :
40% - 60% Need Attention :
0% - 40% Bad, Need to Exchange Required:
How to Use :
1. Power of the analyzer is supplied by the vehicle battery.For testingthe clinchers of the analyzer should be clinched correctly on the battery during is testing.Red clincher means positive terminal and black clincher means negative terminal which should be clinched correspondingly on the terminals of the battery.:
2. Turn on and input:
a. Press the power button for 1 second:
b. The screen gets lightening and Bee alarm will emit a Bsound.:
The screen shows moving digits, all test indexes and low battery caution index.:
c. Press OKit gets into the step of CCA (Cold Cranking Ampere) value input:
d. The third digit on the right of the four digits number index blinks, it means the indication digit is changeable by UP(increasing) or DOWN(decreasing) function button. Press the UP(increasing) or DOWN(decreasing) function button until the correct digit shows and move to next digit place for value-input by pressing SEL.:
e. The units digit on the right if the four-digits number carries each time 5 units in adding, the other digits carry once an unit in adding.:
f. After input steps are completed, pressOK, the analyzer will start testing mode for 10 seconds. :
Package List:
1 x Battery Tester :
1 x Instruction Manual :

Mais produtos na categoria