• Rookie
Fã de lareira da chaminé uzouri, tampa da capota de chaminé, 100w 4 folhas induzidas fã de draft para chaminé, evacuador de fumaça de chaminé, para diâmetro interno de chaminés 13,5cm-20cm

Fã de lareira da chaminé uzouri, tampa da capota de chaminé, 100w 4 folhas induzidas fã de draft para chaminé, evacuador de

Rating 
€ 1.33

Montante
In stock

1 O ventilador indutor de rascunho elétrico ajuda as lareiras a escapar, fornos de pizza, fogões de madeira, ventilador de chaminé de 120 W para o diâmetro da combustão 13. É muito adequado para acessórios de chaminé. A chaminé induzida pelo ventilador de draft gera sucção e induz a rápida descarga de fumaça para impedir que a fumaça seja incapaz de sair do combustão suavemente devido à pobre chaminé. Esse tipo de ventilador induzido é usado em chaminés /lareira doméstica e a temperatura da saída não deve exceder 80 graus. O ventilador induzido deve estar a mais de 6 metros da fonte de incêndio. Além disso, o ventilador induzido será queimado. Fácil de instalar, muito silencioso, adequado para a maioria dos tipos de chaminés e não exige que os técnicos profissionais instalem. Não apenas a fumaça será descarregada rapidamente, mas também tem um excelente desempenho. A tensão de operação do produto é (tensão -120 V, estaremos equipados com um conversor de tensão) e o ventilador de rascunho induzido pela chaminé é usado deixando duas extremidades do fio para conexão com a fonte de energia.

Mais dados

Voltage:
( Americas -120V voltage, we will be equipped with a voltage converter)
Power;100W:
Color:
picture color
Note:
1. Domestic chimney adopts induced draft fan, and the outlet temperature should not exceed 60 degrees. Otherwise, the induced draft fan will be damaged. Install the power cord at least 0.5 square copper wire:
2. When installing or removing, please turn off the power switch to avoid electric shock.:
3. The interface with the smoke evacuator must be fixed with waterproof insulating tape.:
4. The installation at the interface with the chimney must be firm, and the interface must be closely integrated with the chimney to get the best effect.:
5. When the induced draft fan stops working, attention should be paid to the backflow of smoke causing smoke to emerge.:
6. The smoke evacuator is placed on the chimney. The smoke exhauster must be more than 6 meters away from the fire source, otherwise the induced draft fan will be burned. The temperature of the chimney cannot burn the insulation layer of the power cord.:
Package Included:
1 *Induced draft fan :

Mais produtos na categoria